Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Nanometrization of Lanthanide‐Based Coordination Polymers

Heteronuclear lanthanide‐based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare‐earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non‐toxic polyols. Bulk powders of the formula [Ln_2?2xLn′_2x(bdc)₃ ? 4 H₂O]_∞ (where H₂bdc denotes 1,4‐benzene‐dicarboxylic acid, 0≤x≤1, and Ln and Ln′ denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light‐scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide‐based coordination polymers.     

Data fusion methodologies for food and beverage authentication and quality assessment – A review

The ever increasing interest of consumers for safety, authenticity and quality of food commodities has driven the attention towards the analytical techniques used for analyzing these commodities. In recent years, rapid and reliable sensor, spectroscopic and chromatographic techniques have emerged that, together with multivariate and multiway chemometrics, have improved the whole control process by reducing the time of analysis and providing more informative results. In this progression of more and better information, the combination (fusion) of outputs of different instrumental techniques has emerged as a means for increasing the reliability of classification or prediction of foodstuff specifications as compared to using a single analytical technique. Although promising results have been obtained in food and beverage authentication and quality assessment, the combination of data from several techniques is not straightforward and represents an important challenge for chemometricians. This review provides a general overview of data fusion strategies that have been used in the field of food and beverage authentication and quality assessment.     

A comparison between parallelization approaches in molecular dynamics simulations on GPUs

We test the relative performances of two different approaches to the computation of forces for molecular dynamics simulations on graphics processing units. A “vertex‐based” approach, where a computing thread is started per particle, is compared to an “edge‐based” approach, where a thread is started per each potentially non‐zero interaction. We find that the former is more efficient for systems with many simple interactions per particle while the latter is more efficient if the system has more complicated interactions or fewer of them. By comparing computation times on more and less recent graphics processing unit technology, we predict that, if the current trend of increasing the number of processing cores—as opposed to their computing power—remains, the “edge‐based” approach will gradually become the most efficient choice in an increasing number of cases. © 2014 Wiley Periodicals, Inc.     

Real‐time electro‐diffusion method to discriminate carbon nanomaterials

We report both the experimental and theoretical insights of differential electro‐diffusion behavior of carbon nanomaterials (e.g. single wall, multiwall carbon nanotubes, and graphene). We thus discriminate one from the other in a soft gel system. The differential mobility of such material depends on their intrinsic properties, both extend and rate of migration bearing the discriminatory signature. The mobility analysis is made by a real time monitoring of the respective bands.     

Missing value imputation strategies for metabolomics data

The origin of missing values can be caused by different reasons and depending on these origins missing values should be considered differently and dealt with in different ways. In this research, four methods of imputation have been compared with respect to revealing their effects on the normality and variance of data, on statistical significance and on the approximation of a suitable threshold to accept missing data as truly missing. Additionally, the effects of different strategies for controlling familywise error rate or false discovery and how they work with the different strategies for missing value imputation have been evaluated. Missing values were found to affect normality and variance of data and k‐means nearest neighbour imputation was the best method tested for restoring this. Bonferroni correction was the best method for maximizing true positives and minimizing false positives and it was observed that as low as 40% missing data could be truly missing. The range between 40 and 70% missing values was defined as a “gray area” and therefore a strategy has been proposed that provides a balance between the optimal imputation strategy that was k‐means nearest neighbor and the best approximation of positioning real zeros.     

Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

An emerging strategy for tracing the anti-erectile dysfunction components of raw and salt-processed semens of Astragali Complanati by combinatory liquid chromatography–mass spectrometry-based quantitative analysis,efficacy assessment on impotent rats,and partial least squares regression

Semens of Astragali Complanati own anti-erectile dysfunction effect; however, the components which contribute to the anti-erectile dysfunction effect remain unclear. This work raised a strategy that integrates liquid chromatography coupled mass spectrometry-based quantitative analysis, anti-erectile dysfunction assessment on impotent rats, and their relationship analysis for pinpointing anti-erectile dysfunction components from semens of Astragali Complanati. For simultaneous quantification of seven major components in raw and salt-processed semens of Astragali Complanati, an accurate and reliable liquid chromatography–mass spectrometry method was developed under multiple reaction monitoring mode. Of note, chloramphenicol was employed as the internal standard. The method showed good linearity and repeatability, where the recovery rates of each component ranged from 98.1 to 104.7%, and the precisions of intra- and interday were all within 3.4%. The method has been used for quantification of the seven major components in 10 batches of raw and salt-processed semens of Astragali Complanati. Then, the anti-erectile dysfunction effects of raw and salt-processed semens of Astragali Complanati were evaluated on impotent rats. Gray relationship analysis and partial least squares regression were combined for elucidating the relationship. As a result, complanatuside, astragalin, complanatoside B, and kaempferol were found to be responsible for anti-erectile dysfunction effect of Astragali Complanati.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.